Panasonic AV-HS410 HD/SD Live Mischer

Panasonic AV-HS410 HD/SD Live Mischer
Der AV-HS410 ist ein zwischen HD und SD umschaltbarer 1ME-Mischer, der mit seiner großen Auswahl an Ein- und Ausgängen, den vielen attraktiven Effekten und der Systemerweiterbarkeit trotz seines kompakten Formats auf halber 19"-Rackbreite mit vielen High-End-Mischern konkurrieren kann.
In der Standardausstattung hat er 9 Eingänge, er kann bei Installation von Erweiterungsboards aber auf eine maximale Kapazität von 13 Eingängen erweitert werden. Der Mischer bietet vielseitige Effekte, zum Beispiel Übergänge mit digitalen Videoeffekten und Primatte®-Chromakeying-Anwendungen.

Der LCD-Farbmonitor mit 178 mm (7 Zoll) erleichtert die Bedienung durch den übersichtlichen Einstellungsbildschirm, eine Speicher-Vorschau, verbesserte MultiViewer-Funktionen und eine Schaltflächenanordnung, die das Arbeiten bei Live-Übertragungen erheblich erleichtert.

Features
- Leistung und Funktionen auf High-End-Niveau
- Erweiterbarer 1ME-Mischer mit optimierter Benutzeroberfläche
- HD/SD-Multiformat mit 9 Eingängen als Standard und maximal 13 Eingängen
- Neue Speicherfunktionen und attraktive, hochwertige Effekte

Leistungsbedarf

AC 100 V bis 240 V, 50 Hz/60 Hz, 88 W

Betriebstemperatur

0 °C bis 40 °C (32 °F bis 104 °F)

Luftfeuchtigkeit bei Betrieb

10 % bis 90 %

Abmessungen (B × H × T)

440 mm × 158 mm × 361 mm (17-5/16 inches × 6-7/32 inches × 14-7/32 inches)´

Gewicht

ca. 6.2 kg (13.669 lb)

Video-Eingänge (13 signal lines maximum)

Standard SDI: 8 signal lines, BNC × 8 (SDI INPUT 1 to SDI INPUT 8)
(The up-converter function can be used for the SDI INPUT 5 to SDI INPUT 8 connectors.)
Optional: Up to 4 additional signal lines (IN A1, IN A2, IN B1, IN B2)
(Up to two option boards can be installed in the two input/output slots.)

Video-Ausgang (10 signal lines, maximum)

Standard SDI: 5 signal lines, BNC × 6
(SDI OUTPUT 1 to SDI OUTPUT 5 × 1 line each, 2 distributed outputs for SDI OUTPUT 1 only)
Standard DVI-D: 1 signal line, DVI-D × 1
Optional: Up to 4 additional lines (OUT A1, OUT A2, OUT B1, OUT B2)

PGM, PVW, AUX1 to AUX4, MV (MULTI_VIEW), CLN, KEYOUT and MEM PVW can be assigned to SDI OUTPUT 1 to SDI OUTPUT 5, DVI D OUT, OUT A1, OUT A2, OUT B1 and OUT B2.

CLN can be pre-selected from KEY or DSK using a menu. (Up to two option boards can be installed in the two input/output slots.)

Signal-Formate

SD: 480/59.94i, 576/50i
HD: 1080/59.94i, 1080/50i, 720/59.94p, 720/50p, 1080/24PsF*,1080/23.98PsF

Signalverarbeitung

Y: PB: PR 4: 2: 2, 10 bit, RGB 4:4:4, 8 bit

ME Number

1 ME

SDI-Eingänge

HD-SDI: HD Serial digital (SMPTE 292M)
SD-SDI: SD Serial digital (SMPTE 259M)
8 signal lines, standard: IN1 to IN8
12 signal lines, maximum: IN A1, IN A2, IN B1, IN B2
(When two AV-HS04M1 boards are used; with active through)
HD: SMPTE 292M (BTA S-004B) standard complied with
0.8 V [p-p] ±10 % (75 ?)
Automatic equalizer More than 100 m (328 ft)
(when 1.5 Gbps/5C-FB cable is used)
SD: SMPTE 259M standard complied with
0.8 V [p-p] ±10 % (75 ?)
Automatic equalizer 200 m (656 ft) (when 5C-2V cable is used)

SDI Outputs

HD-SDI: HD Serial digital (SMPTE 292M)
SD-SDI: SD Serial digital (SMPTE 259M)
5 signal lines, standard: OUT1 × 2; OUT2 to OUT5 × 1 each
9 signal lines, maximum: OUT A1, OUT A2, OUT B1, OUT B2
(When two AV-HS04M7 boards are used)
HD: SMPTE 292M (BTA S-004B) standard complied with
Output level 0.8 V [p-p] ± 10 %
Rise time HD: Less than 270 ps
Fall time HD: Less than 270 ps
Difference between rise time and fall time
HD: Less than 100 ps
Alignment jitter HD: Less than 0.2 UI (130 ps)
Timing jitter HD: Less than 1.0 UI
Eye aperture ratio More than 90 %
DC offset 0 ±0.5 V
SD: SMPTE 259M standard complied with
Output level 0.8 V [p-p] ±10 %
Rise time Less than 1.5 ns
Fall time Less than 1.5 ns
Difference between rise time and fall time
Less than 0.5 ns
Jitter Less than 0.2 UI

DVI-I Eingang (Option board) (Built-in)

Digital RGB:
XGA (1024 × 768), WXGA (1280 × 768), SXGA (1280 × 1024), WSXGA+ (1680 × 1050), UXGA (1600 × 1200), WUXGA (1920 × 1200)
Vertical frequency: 60 Hz
Video format inputs:
Digital RGB: 1080/50p, 1080/59.94p
Vertical frequency: Same as system formats
Video format outputs:
Digital RGB: 1080/50p, 1080/59.94p, 1080/50i, 1080/59.94i, 720/50p, 720/59.94p
The input and output of analog signals are not supported.
Output support the high-resolution multi view mode:
Signals are output with a high resolution even when SD is set as the system mode. (When high-resolution multi view mode has been enabled, MV is selected as the DVI-D OUT output, and it is not possible to select MV with SDI OUT.)
This connector does not support the HDCP technologies.
Standard input/output: 1 line each (DVI-D IN, DVI-D OUT)
The DVI-I connector cable cannot be used.
For the DVI-D connector cable, use a cable with a length of up to 5 m (16.4 ft).

Reference Input/Output

In GENLOCK mode: Black burst or Tri-level Sync input signals (with loop-through) In internal sync mode: Black burst output signals × 2
Same field frequencies as those of the system formats supported.
With the 1080/24PsF format, only GENLOCK mode supported.
With the 1080/23.98PsF format, black burst with 10F-ID

Video Delay Time

1 line (H), When the frame synchronizer setting is »Off« and the up-converter setting is »Off«.
1 frame (F), When the frame synchronizer setting is »On« or the up-converter setting is »On«.

Control I/O (LAN)

RJ-45
LAN 10BASE-T/100BASE-TX (For IP control)
Connecting cable: LAN cable (category 5 or above), max. 100 m

Control I/O (EDITOR)

D-sub, 9-pin, female
EDITOR Used to control an editor
RS-422 control connector
Communication format
Baud rate: 38400 bps, Character length: 8 bit, Parity: Odd
Stop bit: 1 bit, Flow control: None